Windows Xp/Server 2003 - SIIG UltraATA 133 PCI RAID Quick Installation Manual

4. Insert the driver diskette, check Floppy disk drives,
uncheck the other boxes, click Next, and click Next
again.
5. If the Digital Signature Not Found message appears,
click Yes. Our driver has been thoroughly tested in
Windows for stability.
Note: If prompted for Windows 2000 CD-ROM,
insert the CD into your CD-ROM drive and click
OK. Type in D:\I386 (change D: to match your
CD-ROM drive letter), click OK, then Finish.
6. Click Finish, remove the driver diskette, then restart
Windows to complete driver the installation.
When Windows resumes, go to Medley GUI on page 20
and install the RAID monitoring utility.

Windows XP/Server 2003

For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Microsoft's Windows installation procedure.
3. Restart the computer when prompted by Windows'
installation.
4. At the Windows Setup screen, when prompted,
press F6 to install the driver.
5. When prompted press S to specify the location of
the driver.
6. Insert the driver diskette, then press Enter.
7. Silicon Image Ultra-133 Medley ATA RAID
Controller will appear in the box, press Enter.
18