Windows 2000 - SIIG UltraATA 133 PCI RAID Quick Installation Manual

2. Highlight Silicon Image Sil 0680 Ultra-133 Medley
ATA RAID Controller from SCSI Adapters listing
and select Properties. A message This device is
working properly is displayed in the dialog box, the
driver has been correctly installed.

Windows 2000

For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Microsoft's Windows 2000 installation
procedure.
3. Restart the computer when prompted.
4. At the Windows 2000 Setup screen, when prompted,
press F6 to install the driver.
5. When prompted press S to specify the location of
the driver.
6. Insert the driver diskette, then press Enter.
7.
Silicon Image Ultra-133 Medley ATA RAID
Controller will appear in the box, press Enter.
8. Press Enter to finish driver installation, then follow
the on-screen instructions to complete Windows
2000 installation.
When Windows installation completes, go to Medley
GUI on page 20 and install the RAID monitoring utility.
For An Existing Installation
1. Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Found New Hardware Wizard, click Next.
3. Select Search for a suitable driver for my device
(recommended), then click Next.
17