Windows Me - SIIG UltraATA 133 PCI RAID Quick Installation Manual

6. Remove the driver diskette and restart Windows to
complete the installation.
When Windows resumes, go to Medley GUI on page 20
and install the RAID monitoring utility.

Windows ME

For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Microsoft procedures to install Windows
ME accordingly.
3. Once Windows has installed, right click My
Computer and click Properties. Select Device
Manager tab.
4. Double click PCI RAID controller listed under
Other Devices.
5. Select Driver tab and click Update Driver button.
6. Insert the driver diskette, select Automatic search
for a better driver (Recommended), then click Next.
7. Click Finish, remove the driver diskette, then click
Yes to restart Windows to complete the installation.
When Windows resumes, go to Medley GUI on page 20
and install the RAID monitoring utility.
For An Existing Installation
1. Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Add New Hardware Wizard, insert the driver
diskette.
3. Select Automatic search for a better driver
(Recommended), then click Next.
4. Click Finish.
14