Figure 20: Remove 4,410 Mah Battery; Figure 21: Inserting The 4,410 Mah Battery; Figure 22: Align The Battery Cover - Motorola TC55 Integrator Manual

Figure 20: Remove 4,410 mAh Battery

6 Rotate the battery out of the compartment.
7 Align the three tabs on the bottom of the replacement battery with the three slots in the battery compartment.
8 Press the battery down and rotate until it locks into place.

Figure 21: Inserting the 4,410 mAh Battery

9 Align the battery door with the back of the device.

Figure 22: Align the Battery Cover

10 Press around the edge of the cover to ensure that the battery door is seated properly.
MN000017A01 | October 2013 |
Getting Started | 33
Send Feedback