Chapter 4: Datawedge Configuration; Basic Scanning; Using The Camera - Motorola TC55 Integrator Manual

Chapter
4
DataWedge Configuration
DataWedge is an application that reads data, processes the data and sends the data to an application.

Basic Scanning

Scanning can be performed using either the linear imager or the rear-facing camera.

Using the Camera

To capture bar code data:
Procedure:
1 Ensure that an application is open on the TC55 and a text field is in focus (text cursor in text field).
2 Aim the rear-facing camera at a bar code.
3 Press and hold the Programmable button. By default, a preview window appears on the screen. The LED light red
to indicate that data capture is in process.
MN000017A01 | October 2013 | Send Feedback