Getting Started; Safety First; Operation - Rexel P180 User Manual

1539 P180CD-P185 Shredder Manual EU_1539 P180CD-P185 Shredder Manual EU Text 07/02/2012 15:26 Page 2

GETTING STARTED

Safety First

• Shredders are safe to use as long as you follow
some simple safety guidelines.
• Ensure shredder is plugged into an easily
accessible power outlet and that the cord is not
likely to trip a passer by.
• Ensure the shredder is not positioned against
any walls so that ventilation and cooling are
not restricted.
• Ensure shredder is positioned on a flat surface
• Never attempt to remove the machine top
covers to gain access to the mechanism.

1. Operation

• Push the rocker switch to I position (A on
diagram) auto position and the LED I (E on
diagram) will light up
• Feed paper into the entry slot to activate the
auto start sensor
• The shredder will start and will feed paper
automatically into the shredding mechanism
• Cutters will stop after the paper has been
shredded
• Empty the waste basket regularly
• When not in use return the rocker switch to
0 (B on diagram)
Note: this unit will not operate when door is
open and LED (G on diagram) is illuminated.
2
• Any attempt to repair this unit by unqualified /
unauthorised personnel will invalidate the
warranty.
• Empty the bin at regular times.
• On model fitted with CD / CREDIT card facility
always ensure the flap (I on diagram) is
positioned correctly to ensure any sharp
cuttings are contained within the shredder.
• Do not use cleaning solutions on the surface of
the shredder, clean with a damp cloth and
soap only.
2. CD shredding on
CD models only
• Push the rocker switch to I position (A on
diagram) auto position and the LED I (E on
diagram) will light up
• Rotate the CD shredding flap (I on diagram)
positioned over the paper feeding entry so
that the CD / credit card slots cover the
paper entry slot.
• Press the run forward button (D on diagram)
and hold down
• Put 1 CD at a time or 1 credit card into the
appropriate slot in flap (I)
• The CD or credit card will be shredded
• Release button (D on diagram)
• After shredding return the flap (I on diagram)
to its original position to expose paper
shredding slot.
• When not in use return the rocker switch to
0 (B on diagram)