Off; Start; Load Pellet; Flame Light - Centrometal CentroPelet ZS Instruction Manual

4.1 How to replace the batteries of the remote control
If you need to replace the batteries of the remote control,
remove the back cover as shown in the picture. Replace
the old batteries with the new ones respecting the pola-
rity + and -.
The batteries needed are AAA, 1,5 V.
5.0 Informazioni sul display
(5)
34

OFF

The stove is off.

START

The stove is switching on. Resistance and smokes extractor are on.

LOAD PELLET

The stove starts loading pellets in the brazier.
Resistance, smokes extractor and gear motor are on.

FLAME LIGHT

The stove starts loading pellets in the brazier.
Smokes extractor and gear motor are on.
WORK
The stove is working, in this case with working power 3. Detected room
temperature is 21°C.
Smokes ventilator, gear motor and room ventilator are on during this pha-
se.
CLEANING FIRE-POT
The stove is cleaning the brazier. The smokes extractor is working at its
max. speed and the pellets loading is minimal.