Send; Econo; Turbo; Clock Function - Centrometal CentroPelet ZS Instruction Manual

Please join the following procedure to set
the functioning mode:
Automatic Functioning
Power 1 (on1)
Power 2 (on2)
Power 3 (on3)
Power 4 (on4)
Power 5 (on5)

SEND

Use this key to transmit the selected informa-
tion to the pcb.
Key to lock/unlock the keyboard of the remote
control.
Keep the key pressed for at least two seconds
to activate or deactivate this function.

ECONO

This key activates or deactivates the function
ECONO. Keep the key pressed for at least two
seconds to activate or deactivate this function.

TURBO

This key activates or deactivates the function
TURBO. Keep the key pressed for at least two
seconds to activate or deactivate this function.

CLOCK FUNCTION

Please join the following procedure to set the
clock function on the remote control:
- press .
- You will see the symbol
blinking.
- use the keys
and minutes.
- press again to confirm and SEND to
transmit the function to the pcb.
SLEEP
This key activates the function SLEEP.
Through this function the set temperature will
decrease of 1°C one hour after the switching
on of the stove.
ON1
Using this key you can set a single time schedule for
the automatic switching on of the stove (program 1)
and the time
to set hour
OFF1
Using this key you can set a single time schedu-
le for the automatic switching off of the stove
(program 1)
ON2
Using this key you can set a single time schedu-
le for the automatic switching on of the stove
(program 2)
OFF2
Using this key you can set a single time schedu-
le for the automatic switching off of the stove
(program 2)
AUTO
With this key you can decide to repeat the
programmed switching on and off (program 1
and 2) every day. The key AUTO activates this
function.
Keep the key pressed for at least two seconds
to activate or deactivate this function.
CANCEL
Use the key CANCEL in the event you want to
cancel some programmed switching on or off
of the stove.
29