Automatic Switching Off Off1; Daily Repeat Auto - Centrometal CentroPelet ZS Instruction Manual

Automatic switching off OFF1

Press the key (1). You will see the hours and minutes and
the symbol OFF1 blinking on the remote control. Use the keys
(2) and (3) to change the wished time (intervals
of 10 minutes). To scroll the time faster, keep the keys
and (3) pressed.
Confirm your selection pressing the key
will now read the set switching off time on the remote control.
Press SEND (4) to transmit your selection to the pcb of the stove.
The LED chrono-thermostat will light up on the control board
indicating that the programming is on (5).
The LED chronothermostat switches off as soon as the automa-
tic switching on and off are completed. The remote control does
not show the previously set time schedule anymore.
Program 2 (ON2 and OFF2)
As above but with the keys ON2 and OFF2.
How to cancel any eventual already set timetables.
Please join the following procedure to cancel any other
already set timetables. This example refers to the auto-
matic switching off of the program 1 (Off1). The procedu-
re is the same for all plans.
Press the key corresponding to the switching on or off
time you want to cancel. Referring to the example: press
the key (1). You will see the hours and minutes and
the symbol OFF1 blinking on the display of the remote
control. Now press the key "CANCEL" (2) to cancel the
automatic switching on or off timetables from the display.
Press the key SEND (3) to confirm your selection and tran-
smit it to the pcb of the stove.

Daily repeat AUTO

Using the function AUTO, you can repeat the single auto-
matic switching on and off you selected every day.
You just need to press the key AUTO (1) for at least two
seconds to activate the function. You will read the words
AUTO (2) on the display of the remote control. Press SEND
(3) to confirm your selection and transmit it to the pcb of
the stove. The LED chrono-thermostat will light up on the
control board indicating that the programming is on.
You can deactivate the automatic repeat whenever you
want just pressing the key AUTO again for at least two
seconds. The words AUTO will disappear from the display.
Press SEND (3) to confirm your selection and transmit it to
the pcb of the stove.
WARNING: always clean the brazier before star-
ting an automatic switching on in order to avoid
any possible missed starts up which would dama-
ge your stove and the environment.
(2)
(1) once again.You
OFF1
2
3
4
1
AUTO
CANCEL
3
1
AUTO
2
CANCEL
2
3
1
AUTO
CANCEL
33