7
Operation
Filling the unit
NOTICE!
Possible damages caused by unsuitable hazer fluid
Hazer fluids not approved by the manufacturer may permanently damage the
unit.
Only use the hazer fluids listed on www.thomann.de and follow their instructions
for use.
Ensure that the unit is switched off.
Open the screw-cap of the liquid container and fill in the fog fluid. Make sure that no fluid is
spilled or gets into the device. The easiest way is using a funnel. Fill the fluid container up to
the upper level indicator [FULL].
Screw the cap firmly back on.
Hz-200 DMX
Operation
25