Table of Contents
Advertisement
10
Troubleshooting
Symptom
The unit does not work
No haze output
No response to the DMX controller
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Remedy
Check the mains connection and the main fuse.
1. Check the fluid level of the hazer fluid.
2. Switch the device off and check the hose that leads into the fluid container
for flow.
1. Check the address settings and the DMX polarity.
2. Try using another DMX controller.
3. Check to see if the DMX cables run near or alongside to high voltage cables
that may cause damage or interference to DMX interface circuits.
Hz-200 DMX
Troubleshooting
33
Hide quick links:
Advertisement
Table of Contents
