Power Indicator; When Using Power Management Function; Selecting A Video Source; Picture Size - NEC MultiSync LCD3210 User Manual

Basic Operation

Power Indicator

Power Indicator
Power ON
Power OFF
Power Standby
when "SCHEDULE" is enabled
Power Standby
Diagnosis (Detecting failure)

When Using Power Management Function

The LCD monitor follows the VESA approved DPM Power Man-
agement function.
The power management function is an energy saving function that auto-
matically reduces the power consumption of the display when the keyboard
or the mouse has not been used for a fixed period of time.
The power management feature on your new display has been set
to the "ON" mode. This allows your display to enter a Power Saving
Mode when no signal is detected. This could potentially increase the
life and decrease the power consumption of the display.

Selecting a Video Source

To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set, [AUTO], [NTSC], [PAL],
[SECAM], [PAL60], [4.43NTSC] in according to your video
format.

Picture Size

AV
-continued
Status
Green
Red
Red On
Green Blinking
Red , Green
Red Blinking
*See trouble shooting of page 33
AV
English-19

Picture Mode

RGB 1, 2, 3 HIGHBRIGHT
DVD/HD, VIDEO HIGHBRIGHT
AV
Information OSM
RGB1, 2, 3
RGB2
1024 x 768
)
48kHz 60Hz
AUDIO : 1
SIZE : FULL
DVD/HD
AV
DVD/HD
AUDIO : 3
SIZE : WIDE
V IDEO
AV
VIDEO<S>
NTSC
AUDIO : 3
SIZE : NORMAL
PIP
AV
Main:RGB2
Sub:VIDEO<S>
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
VIDEO<S>
)
NTSC
SIZE : FULL
Denotes an AV unit function.
AV
All AV functions are enabled when the AV unit is installed.
STANDARD sRGB
STANDARD CINEM A
Video Input mode
Input signal Information
Audio input mode
AV
Picture Size mode
Video Input mode
Audio input mode
Picture Size mode
Video Input mode
Input Signal Color System mod e
Audio input mode
Picture Size mode
Main picture Information
Sub picture Information
Main picture Information