Connecting To A Macintosh Computer - NEC MultiSync LCD3210 User Manual

Connections
Connecting your Macintosh computer to your LCD monitor will enable you to display your computer's screen image. Some video cards
®
or drivers may not display images correctly.
•
To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin
to mini D-sub 15 pin).
For older Macintosh computers, use Macintosh cable adapter to connect to your Macintosh's video port.
®
• To connect the RGB 3 IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub 15 pin to
BNC x 5).
• Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special
identification or configuring that may be required.
• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.
LCD monitor
AV
Denotes an AV unit function.
AV
All AV functions are enabled when the AV unit is installed.
-ontinued

Connecting to a Macintosh Computer

English-14
To audio output
To analog RGB output
Mini D-sub 15 pin
To analog RGB input
Mini D-sub 15 pin
LCD monitor (second monitor)
AV