Power On Delay - NEC MultiSync LCD3210 User Manual

OSM Controls
IR CONTROL
TILE MATRIX
HEAT STATUS

POWER ON DELAY

DATE & TIME
SCHEDULE
ADVANCED
OPTION RESET
-Advanced option
ADVANCED OPTION
IR CONTROL
NORMAL
IR CONTROL
LOCK
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION TILE MATRIX
H MONITORS
IR CONTROL
V MONITORS
TILE MATRIX
POSITION
HEAT STATUS
POWER ON DELAY
TILE COMP
DATE & TIME
ENABLE
SCHEDULE
ADVANCED OPTION RESET
:SEL + -:ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
HEAT STATUS
IR CONTROL COOLING FAN1
TILE MATRIX
COOLING FAN2
HEAT STATUS
BRIGHTNESS
POWER ON DELAY
TEMPERATURE
DATE & TIME
SCHEDULE SENSOR 1
ADVANCED OPTION RESET
SENSOR 2
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
POWER ON DELAY
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
+ -:ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
DATE & TIME DATE & TIME
ADVANCED OPTION
YEAR YEAR
MONTH MONTH
IR CONTROL
DAY DAY
TILE MATRIX
HOUR TIME
HEAT STATUS
MINUTE
POWER ON DELAY
DATE & TIME DAYLIGHT SAVING DAYLIGHT SAVING
SCHEDULE
ADVANCED OPTION RESET CURRENT DATE CURRENT DATE
JAN. 01. 2004 JAN. 01. 2004
:SEL :NEXT :RETURN :EXIT MENU
SET EXIT MENU
:SEL :SEL + -:ADJ + -:ADJ
SCHEDULE
ADVANCED OPTION
TODAY 2005.
IR CONTROL
TILE MATRIX 1
HEAT STATUS
2
POWER ON DELAY
3
DATE & TIME
4
SCHEDULE
5
ADVANCED OPTION RESET
6
7
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
:SEL :SEL + -:ADJ + -:ADJ
ADVANCED OPTION
ADVANCED OPTION RESET
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
English-27
Selects the infra-red wireless remote controllers mode.
The item in this menu will become effective by pressing
"SET" button on the selected item.
NORMAL: The monitor will be controlled normally by
wireless remote controller.
LOCK: Disable the monitor control by infra-red wireless
remote controller.
Keep pressing "DISPLAY" button for 5 or more seconds,
this setting will return to "NORMAL".
See "NOTE 2" on page 28
:SET EXIT :RETURN
The "TILE MATRIX" feature allows one image to be
displayed on multiple screens. This feature can be used
with up to 16 monitors. (4 horizontal x 4 vertical)
Using the Tile Matrix function requires the PC output
signal to be sent through a distribution amplifier to each
individual monitor.
H MONITORS: Selects the number of horizontal displays.
1
1
V MONITORS: Selects the number of vertical displays.
1
YES / NO
POSITION: Selects a position to expand the screen.
YES / NO
TILE COMP: Works in tandem with "TILE MATRIX" to
EXIT :RETURN
compensate for the width of the tiled bezels in order to
accurately display the image.
ENABLE: Select "YES", to expand the signal to the
selected settings.
PIP and DYNAMIC zoom mode will be disabled when the
"TILE MATRIX" is activated.
Displays status of COOLING FAN, BRIGHTNESS and
TEMPERATURE.
COOLING FAN activates when the inside temperature
exceeds highest recommended operating temperature
ON
ON
NORMAL
BRIGHTNESS decreases when inside temperature
0.0 C / 32.0 F
0.0 C / 32.0 F
exceeds highest recommended operating temperature
EXIT :RETURN MENU :EXIT MENU
with cooling fan running. In this case a warning is
displayed on the screen.
Adjusts the delay time from "standby" to "power on"
mode.
3 SEC.
"POWER ON DELAY" can be set between
0 and 50 sec.
EXIT :RETURN MENU :EXIT MENU
Sets the current date and time for internal clock.
2004 2004
You should set this function, when you use "SCHEDULE".
JANUARY JANUARY
01 01
00
00 00 : 00
YES / YES / NO NO
TIME TIME
00 : 00 : 00 00 : 00 : 00
:EXIT MENU :EXIT MENU
SET SET :SET :SET EXIT EXIT :RETURN :RETURN MENU MENU
Programs the monitor's working schedule.
Sets the hour and day of the week when the monitor
powers on or off. Also sets the input port.
4. 15 FRI 15:11
ON OFF INPUT
08:30 17:15 RGN1
Select "EXIT" to set schedule.
EVERY DAY MON TUE
WED THU FRI SAT
SUN EVERY WEEK
(see "NOTE 2" on page 28 for further information)
SET SET :SET :SET EXIT EXIT :RETURN :RETURN
Selecting ADVANCED OPTION RESET allows you to
reset all OSM settings from the ADVANCED OPTION
settings, except for DATE & TIME, and SCHEDULE.
NO
Select "YES" and press "SET" button to restore the
YES
factory preset data.
EXIT :RETURN MENU :EXIT MENU
Press "EXIT" button to cancel and then return the
previous menu.