NEC MultiSync LCD3210 User Manual
Nec display solutions user's manual monitor lcd3210
Hide thumbs
Also See for MultiSync LCD3210:
- Owner's manual (38 pages) ,
- Dimensions (1 page) ,
- Specification (6 pages)
Subscribe to Our Youtube Channel
Related Manuals for NEC MultiSync LCD3210
Summary of Contents for NEC MultiSync LCD3210
- Page 1 MANUEL UTILISATEUR To learn about other special offers, register online at www.necdisplay.com...
-
Page 2: Table Of Contents
Index Important Information ... English-2 Safety Precautions, Maintenance, & Recommended Use ... English-3 Contents ... English-4 Attaching LCD Options ... English-5 Parts Name and Functions Control Panel ... English-6 Terminal Panel ... English-7 Wireless Remote Control ... English-8 Operating Range for the Remote Control ... English-9 Handling the Remote Control ... -
Page 3: Important Information
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to 60950-1. FCC Information 1. Use the attached specified cables with the MultiSync® LCD3210 (L325RM) color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. -
Page 4: Safety Precautions, Maintenance & Recommended Use
Safety Precautions, Maintenance & Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MultiSync® LCD3210 LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. -
Page 5: Contents
Denotes an AV unit function. All AV functions are enabled when the AV unit is installed. The following optional components are available to use with the MultiSync LCD3210.To obtain the optional components and additional information, contact Customer Service at (800) 632-4662. -
Page 6: Attaching Lcd Options
For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation. -
Page 7: Parts Name And Functions
Parts Name and Functions EXIT POWER button ( Switches the power on/off. See page 18. MUTE button Switches the audio mute ON/OFF. INPUT button Acts as SET button within the OSM menu. Selects which signal connected to the display is shown. (Toggle switches between [RGB1], [RGB2], [RGB3], [DVD/HD], or [VIDEO].) [DVD/HD] and [VIDEO] inputs are enabled when the AV-unit... -
Page 8: Terminal Panel
Parts Name and Functions LCD monitor AC IN PC IN RGB 1 (DVI-D) RGB 2 (D-SUB) AC IN connector Connects with the supplied power cord. RGB 1 IN (DVI-D) To input digital RGB signals from a computer. * This connector does not support analog input. RGB 2 IN (mini D-Sub 15 pin) To input analog RGB signals from a personal computer or other RGB equipment. -
Page 9: Wireless Remote Control
Parts Name and Functions REMOTE CONTROLLER RU-M104 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] and [VIDEO<S>]. [DVD/HD], [VIDEO] and [VIDEO<S>] inputs can be selected when the AV optional module is installed. -
Page 10: Operating Range For The Remote Control
Parts Name and Functions Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor’s remote sensor while pressing button. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor’s remote control sensor and at a hori- zontal and vertical angle of within 30 degree within a distance of about 3 m/10 ft. -
Page 11: Setup Procedure
2. Align the batteries according to the (+) and (–) indications inside the case. 3. Replace the cover. CAUTION Incorrect usage of batteries can result in leaks or bursting. NEC recommends the following battery use: • Place “AA” size batteries matching the + and - signs on each battery to the + and - signs of the battery compartment. -
Page 12: Recommended Adjustments
We recommend using the optional speakers designed for the MultiSync LCD3210. The external speaker terminals of the MultiSync LCD3210 may be connected with the speaker plug of a mainframe sound speaker. It this case, please exchange the lead connector of a mainframe sound speaker for an attached speaker plug. -
Page 13: Connections
Connections Before connecting external equipment to LCD: First turn off the power to all of the equipment associated with the LCD as well as that of the equipment to be connected. For questions regarding external equipment please refer to the user’s manual supplied with that equipment. LCD monitor Attaching the Ferrite Core Attach the Ferrite Core to PC Audio Cable. -
Page 14: Connecting The Lcd Monitor To A Pc
Connections -continued Sca n n i n g f re q u e n cy Re s o l u t i o n Horizontal Vertical 64 0 x 4 8 0 3 1 . 5 Hz 6 0 H z 80 0 x 6 0 0 3 7 . -
Page 15: Connecting To A Macintosh Computer
Connections -ontinued Connecting to a Macintosh Computer Connecting your Macintosh computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards ® or drivers may not display images correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). -
Page 16: Connecting To A Computer With A Digital Output
Connections -continued Connecting to a Computer with a Digital Output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) stan- dard. • The RGB 1 IN connector also accepts a DVI-D cable. •... -
Page 17: Connecting To A Dvd Player
Connections -continued Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player’s owner’s manual for additional information. • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). -
Page 18: Connecting To A Stereo Amplifier
Connections -continued Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier’s owner’s manual for additional information. • Turn on the LCD monitor and the amplifier only after all connections have been made. •... -
Page 19: Using The Remote Control
Basic Operation The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or off using the following three options: Power Button Main Power Switch -Power ON and OFF Modes 1. -
Page 20: Power Indicator
Basic Operation Power Indicator Power Indicator Power ON Power OFF Power Standby when “SCHEDULE” is enabled Power Standby Diagnosis (Detecting failure) *See trouble shooting of page 33 When Using Power Management Function The LCD monitor follows the VESA approved DPM Power Man- agement function. -
Page 21: Osm (On-Screen-Manager) Controls
OSM (On-Screen Manager) Controls Press MENU button to open Main-menu Press UP or DOWN button to select sub-menu Remote Control Press UP or DOWN button to select Control Panel UP or DOWN button MAIN MENU PICTURE SCREEN AUDIO OSM screen CONFIGURATION 1 CONFIGURATION 2 ADVANCED OPTION... -
Page 22: Screen
OSM Controls -Screen PICTURE BRIGHTNESS CONTRAST TINT SHARPNESS TINT COLOR BLACK LEVEL NOISE REDUCTION *:INPUT DVD/HD,VIDEO only :SEL :NEXT EXIT :RETURN PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TINT COLOR BLACK LEVEL *:INPUT DVD/HD,VIDEO NOISE REDUCTION only :SEL :NEXT EXIT :RETURN PICTURE BRIGHTNESS CONTRAST COLOR CONTROL... - Page 23 OSM Controls -Audio SCREEN H POSITION V POSITION CLOCK V RESOLUTION CLOCK PHASE H RESOLUTION V RESOLUTION ZOOM MODE *:INPUT RGB1/2/3 only SCREEN RESET :SEL :NEXT EXIT SCREEN H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION ZOOM MODE SCREEN RESET :SEL :NEXT...
-
Page 24: Configuration 1
OSM Controls -Configuration English-23... -
Page 25: Configuration 2
OSM Controls-Configuration2 CONFIGURATION 1 AUTO SETUP SCREEN SAVER AUTO ADJUST AUTO BRIGHTNESS POWER SAVE LANGUAGE SCREEN SAVER SIDE BORDER COLOR :SEL :NEXT CONFIGURATION 1 POWER SAVE COLOR SYSTEM LANGUAGE SCREEN SAVER COLOR SYSTEM SIDE BORDER COLOR CONFIGURATION RESET FACTORY RESET *:INPUT VIDEO only :SEL :NEXT... -
Page 26: Off Timer
DVD/DH or VIDEO input. NOTE: The Monitor will not search the other video input port. MONITOR INFORMATION Indicates the model and serial number of your MODEL NAME: monitor. LCD3210 SERIAL: 12315XXX :RETURN :EXIT MENU EXIT MENU :RETURN... -
Page 27: Advanced Option
OSM Controls -Advanced option Main-Menu ADVANCED OPTION Sub-Menu ADVANCED OPTION S-VIDEO MODE BLACK LEVEL EXPANSION GAMMA SELECTION S-VIDEO MODE SCAN MODE SCAN CONVERSION FILM MODE TILE MATRIX :SEL :NEXT ADVANCED OPTION S-VIDEO MODE INPUT RESOLUTION GAMMA SELECTION INPUT RESOLUTION SCAN CONVERSION TILE MATRIX HEAT STATAS IR CONTROL... -
Page 28: Power On Delay
OSM Controls -Advanced option ADVANCED OPTION IR CONTROL IR CONTROL TILE MATRIX HEAT STATUS POWER ON DELAY DATE & TIME SCHEDULE ADVANCED OPTION RESET :SEL :NEXT EXIT ADVANCED OPTION IR CONTROL TILE MATRIX TILE MATRIX HEAT STATUS POWER ON DELAY DATE &... - Page 29 As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
-
Page 30: Using The Lcd With A Personal Computer (Pc)
Using the LCD with a Personal Computer (PC) LCD monitor Connection LCD Monitor+PC RS-232C “IN” terminal RS-232C Cable English-29... - Page 31 Using the LCD with a Personal Computer 3) Control sequence (1) The command from a personal computer to the LCD monitor will take 400ms. (2) The LCD monitor will send a return command 400ms* after it has received an encode. If the command isn't received correctly, the LCD monitor will not send the return command.
- Page 32 Using the LCD with a Personal Computer Structure of the Read-command POWER OFF(stand by) RGB-1(DVI-D) RGB-2(D-sub) RGB-3(BNC) Input Video DVD/HD S-VIDEO Picture mode Highbright Standard resolution 0.5 C Around resolution Temperature board resolution of Internal 0.5 C monitor Around resolution Power NOTE: For complete information please see file "External_Control_LCD3210.pdf"...
-
Page 33: Features
Standard Mounting Interface allows users to connect their LCD monitor to any VESA standard third party mounting ® arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. NEC recommends using mounting interface that comply with UL1678 standard in North America. -
Page 34: Troubleshooting
Troubleshooting No picture • The signal cable should be properly connected to the display card/computer. • The display card should be properly seated in its slot. • Front Power Switch and computer power switch should be in the ON position. •... - Page 35 References NEC Monitor Customer Service & Support Customer Service and Technical Support: Parts and Accessories/ Macintosh Cable Adapter: Warranty Information Online Technical Support Sales and Product Information Sales Information Line: Canadian Customers: Government Sales: Government Sales email: Electronic Channels World Wide Web:...
-
Page 36: Specifications
Specifications Product Specifications(LCD3210) LCD Module Pixel Pitch Resolution Color Brightness Contrast ratio Viewing Angle Design View Distance Frequency Horizontal Vertical Pixel Clock Viewable Size Input Signal PC Input Video Sync Input terminal VIDEO Input AUDIO Input RS232C Output Video signal... -
Page 37: Pin Assignment
Pin Assignment 1) Analog RGB Input (MiniDsub): R G B 2 Video Signal Red Video Signal Green Video Signal Blue Red-GND Green-GND Blue-GND 2) EnrtéeS-VIDEO :V I D E O Pin No Name J (Luminance) 3) Digital RGB Input (DVI-D): R G B 1 Shield (TX2/TX4) Shield (TX1/TX3) 12 NC... -
Page 38: Limited Warranty
(at NEC DISPLAY SOLUTIONS’ sole option) any part of the enclosed unit which proves defective for a period of one (1) year from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. -
Page 39: Declaration Of The Manufacturer
Declaration of the Manufacturer We hereby certify that the color moni- tor MultiSync ® LCD3210 (L325RM) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: — EN 55022 — EN 61000-3-2 — EN 61000-3-3 — EN 55024 and marked with NEC Display Solutions, Ltd. -
Page 40: Declaration Of Conformity
The NEC Display Solutions of America, Inc. product(s) discussed in this document are warranted in accordance with the terms of the Limited Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data and operator control.
Need help?
Do you have a question about the MultiSync LCD3210 and is the answer not in the manual?
Questions and answers