Viewing Unit Information; Restoring The Settings; Customizing The Map Data Fields - BMW Motorrad Navigator III Reference Manual

C BMW M
USTOMIZING THE
Touch Screen—turn on and off the touch screen. When off,
you must use the keys to select options and enter data. Turn the
E
Navigator III off and back on to activate the touch screen again.
N
Adjusting Bluetooth
Press the MENU key > Settings > Bluetooth.
Connections—view all paired devices, and connect or disconnect
the device. Touch Add Device to add a new device.
Bluetooth—enable and disable Bluetooth technology.

Viewing Unit Information

Press the MENU key > Settings > About. Touch an item in the list
to view information about it.

Restoring the Settings

To restore the unit to its original settings, press the MENU key >
Settings > Restore Defaults > Yes.
EN-18
N III
OTORRAD AVIGATOR

Customizing the Map Data Fields

You can customize the information that appears in the data fields
in the Map page. From the Main menu, touch Settings > Map >
> Map Data Fields.
1. Touch Wide or Thin. Touch Next.
2. Touch the data field type that you want to customize.
3. Touch the data field you want to customize.
4. Select the type of data to appear in this field.
5. Select the data field layout. Touch OK.
1/2 indicates this is your first choice out of two choices for
the layout of the data field. 2/2 means this is your second
choice. Some types of data fields allow you three choices,
but some only provide one option.
6. Repeat for each data field.
7. Touch Next. Repeat for the data fields displayed when you
are not following a route.
BMW Motorrad Navigator III Reference Guide