Using The Apps; Viewing The Entire Route On The Map - BMW Motorrad Navigator V Owner's Manual

Viewing the Entire Route on the Map

1 While navigating a route, select the navigation bar at the top
of the map.
2
Select > Map.
Viewing the Next Turn
While navigating an automobile route, a preview of the next
turn, lane change, or other maneuver appears in the upper-left
corner of the map.
The preview includes the distance to the turn or maneuver and
the lane in which you should be traveling, if available.
From the map, select
Viewing Junctions
While navigating a route, you can view the junctions on major
roadways. When you approach a junction in a route, the image
of that junction appears briefly, if available.
From the map, select
Viewing Traffic Alerts
While navigating a route, a traffic alert may appear in the
navigation bar.
Select the alert to view more information.
Viewing the Trip Computer
The trip information page displays your present speed and
provides statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Resetting Trip Information
1
From the map, select Speed .
2
Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first
page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding Nearby Services
You can use the Where Am I? page to find nearby services,
such as fuel, hospitals or police stations.
1
From the map, select the vehicle.
2
Select a category.
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1
From the map, select the vehicle.
2
Select > Directions to Me.
3
Select a starting location.
4
Select Select.
Hands-Free Voice Prompts
to view the next turn on the map.
to view the junction, if available.
Hands-Free Voice Prompts
About Wireless Headsets
NOTE: To listen to high-quality audio wirelessly, you can
connect to a Bluetooth headset that supports the A2DP profile.
Using wireless technology, your device can send audio
navigation prompts to a wireless headset.
Enabling Bluetooth Wireless Technology
1
Select Settings > Bluetooth.
2 Select Bluetooth.
Pairing a Wireless Headset
NOTE: Only one headset can be active at a time.
Before you can receive navigation prompts through your
headset, you must pair your device with a compatible mobile
headset.
1 Place your headset and your Bluetooth device within 33 ft.
(10 m) of each other.
2 On your device, enable Bluetooth wireless technology.
3
On your headset, enable Bluetooth wireless technology and
make it visible to other Bluetooth devices.
4
Select Settings > Bluetooth > Scan for Devices.
A list of nearby Bluetooth devices appears.
5
Select your headset from the list.
6
Select OK.
Your device sends navigation prompts to your headset as you
navigate a route.
Deleting a Paired Headset
You can delete a paired headset to prevent it from automatically
connecting to your device in the future.
1
Select Settings > Bluetooth.
2
Select the device you want to delete.
3 Select Unpair Device.
Disconnecting Your Headset
1
Select Settings > Bluetooth.
2
Select the device you want to disconnect.
3
Clear the device check box.
Your headset is disconnected from your device but remains
paired with your device.
Tips After Pairing the Devices
• After the initial pairing, the two devices can connect
automatically each time you turn them on.
• When your phone is connected to your device in the
automotive mount or to a Bluetooth headset, you are ready
to receive voice calls.
• When you turn on the device, it tries to connect to the last
phone or Bluetooth device to which it was connected.
• You might need to set your phone to connect to the device
automatically when the device is turned on.

Using the Apps

Using Help
Select Apps > Help to view information about using the
device.
Searching Help Topics
Select Apps > Help > .
7