Connecting The Appliance To The Power Supply; Electrical Connections - AEG MCC4061E User Manual

38 Installation

Connecting the appliance to the power supply

• The electrical outlet should be readily accessible so that the unit can be unplugged
easily in an emergency. Or it should be possible to isolate the oven from the
supply by incorporating a switch in the fixed wiring in accordance with the wiring
rules.
• The socket should not be positioned behind the cupboard.
• The best position is above the cupboard, see (A).
If connection is to be made to position (A), remove the clip
from position 15 on the rear of the oven (see page 7) and use
the clip to secure the power supply cord to the top of the
housing unit (see page 37).
When not connecting the power supply cord to position (A),
the power supply cord should be routed under the oven.
• Connect the appliance to a single phase 230 V/50 Hz
alternating current via a correctly installed earth socket.
The socket must be fused with a 16 A fuse.
• The power supply cord may only be replaced by an electrician.
• Before installing, tie a piece of string to the power supply cord to facilitate
connection to point (A) when the appliance is being installed.
• When inserting the appliance into the high-sided cupboard, DO NOT crush the
power supply cord.
• Do not immerse the power supply cord or plug in water or any other liquid.

Electrical connections

WARNING!
THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should this safety measure not be observed.
• If the plug that is fitted to your appliance is not suitable for your socket
outlet, you must call your local authorised AEG service agent.
(A)