6.14.2 Local control of CCDA and CCDS dome cameras
The following commands are supported when controlling CCDA and CCDS dome
cameras locally on the DVR. Select the desired command in the PTZ menu using
either the front panel buttons or a connected USB mouse.
Set Preset / Preset View
Once the OSD is displayed on the video output, navigation and parameter setup
can be performed using the following commands:
Select parameter / next page
Deselect parameter / page back
Speed control for Pan/Tilt movements
Stored, fixed camera position that you can return to by entering
the preset number
The dome camera will perform an auto scan operation
Repeat pre-configured sequence of presets that the dome will
move between continuously.
Open the menu of the dome for configuration