Size And Position Controls; Geometry Controls - NEC MultiSync A500+ User Manual

Controls
OSM(On-Screen Manager) control buttons on the front of
the monitor function as follows:
EXIT
CONTROL /
CONTROL -/+
PROCEED
RESET
Brightness/Contrast Controls
BRIGHTNESS: Adjusts the overall image and background screen
brightness.
CONTRAST: Adjusts the image brightness in relation to the
background.

Size and Position Controls

LEFT/RIGHT: Moves the image horizontally (left or right).
DOWN/UP: Moves the image vertically (up or down).
NARROW/WIDE: Decreases or increases the horizontal size of the
image.
SHORT/TALL: Decreases or increases the vertical size of the
image.

Geometry Controls

The Geometry controls allow you to adjust the curvature or angle of
the sides of your display.
IN/OUT (pincushion): Decreases or increases the curvature of
the sides either inward or outward.
LEFT/RIGHT (pincushion balance): Decreases or increases the
curvature of the sides either to the left or right.
TILT (parallelogram): Decreases or increases the tilt of the sides
either to the left or right.
ALIGN (trapezoidal): Decreases or increases the bottom of the
screen to be the same as the top.
Exits the OSM menu.
Moves highlighted area left/right to select one of the
controls.
Moves the bar in the - or + direction to decrease or
increase the adjustment.
Enters OSM menu and selects icons at the top of the menu.
Resets the highlighted control to the factory setting.
E - 4