Page 1
User’s Manual Desktop Monitor AccuSync AS173M AccuSync AS194Mi MODEL: M179E7, M199E8 Please find your model name in the label on the rear side of monitor.
Repacking the Monitor, Flexible Arm Installation Appendix B Repacking the Monitor............26 Remove the Monitor Stand for Mounting ......27 Flexible Arm Installation............27 Mount the Flexible Arm ............27 Manufacturer’s Recycling and Energy Information Appendix C Disposing of your old NEC product ........29 Energy Saving ..............29...
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
Page 4
(4) The image shown in this user’s manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. (5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
Important Information Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOINN HEN SETTINN UP AND USINN THE LCD COLOR MONITORN About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property.
Page 6
WARNING Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • Do not place heavy objects on the cord. • Do not place the cord under the monitor. • Do not cover the cord with a rug, etc. •...
Page 7
Please use the power cord provided with this display in accordance with the power cord table. If a power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety standards in the country of purchase.
Page 8
NOTE:: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor when not in use.
Page 9
Ergonomics CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATINUE. CHECK THE FOLLOINN HEN YOU POSITION THE MONITORN To realize the maximum ergonomics benefits, we recommend the followingN • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects).
This monitor has a manufacturing carbon footprint of approximately 43.5 kg. NOTE: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values.
Parts Name and Functions Control Panel Item Function Power Turns the monitor on and off. Indicates that the power is on. INPUT/RESET hen the OSD menu is not displayed on the screen, it selects the input signal. hen the OSD menu is displayed on the screen, it resets the function adjustment.
Terminal Panel 7 Security Slot 6 Headphone 8 Label 1 AC IN Connector 2 Audio IN 4 HDMI IN 3 DisplayPort IN 5 VGA IN AC IN Connector VGA IN (mini D-Sub 15-pin) Connects with the supplied power cord. Analog RNB signals input. Audio IN Headphone Jack Audio signal input from external equipment such as a...
Connections Video Input Connections • VNA (mini D-Sub 15-pin) – Analog video signal connection to a computer. Video only, no audio signal. • HDMI – High definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player, game console, etc.
Setup For box contents, please refer to the printed contents sheet provided in the box. The accessories included depends on the location where the monitor was shipped. To attach the base stand to the monitor stand: Align the locking tabs on the base stand with the holes on the monitor stand. Insert the base stand into the monitor stand.
3. Attach the cable holder onto the monitor stand (Figure 2). Cable Holder Monitor Stand Figure 2 NOTE: To prevent damage to the cables, cable holder, and monitor, spread the cables under the cable holder so that the cables rest side-by-side. 4.
Basic Operation Chapter 2 This Chapter IncludesN > “Using the OSD (On-Screen Display) Controls” on page 16 > “Changing the Input” on page 17 > “Power management function LED indicator patterns” on page 17 English−15...
Using the OSD (On-Screen Display) Controls OSD (On-Screen Display) control button on the front of the monitor function as followsN To open the OSD menu, press the SELECT button. Please refer to the • “Control Panel” on page 10 for basic functions of the buttons.
Changing the Input Changing the Input To change the signal input, press the INPUT/RESET button. NOTE:: If there is no active video signal on another input the monitor switches back to the current input. For HDCP Content HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via the digital inputs, this does not necessarily mean that the monitor is not functioning properly.
Troubleshooting Chapter 3 This Chapter IncludesN > “Screen Image and Video Signal Issues” on page 19 > “Hardware Issues” on page 20 > “Image Persistence” on page 20 English−18...
Screen Image and Video Signal Issues No picture • Make sure the signal cable is fully connected to the monitor and the computer. • Make sure there is no DisplayPort converter adapter connected. The monitor does not support DisplayPort converter adapter.
NOTE:: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
OSD Controls List Appendix A Default values can be provided on request. Controls the volume of the speakers or headphones. VOLUME To mute the speaker output, select the Audio icon and press the INPUT/RESET button. Adjusts the overall image and background screen brightness. BRINHTNESS Press the INPUT/RESET button to enter [ECO MODE].
Page 26
Selecting [TOOL] opens the [TOOL] sub-menu. TOOL Turns the [RESPONSE IMPROVE] function [ON] or [OFF]. RESPONSE IMPROVE* This function may reduce blurring that occurs in some moving images. This function turns the [DDC/CI] function [ON] or [OFF]. DDC/CI Displays the estimated carbon saving information in kg. CARBON SAVINNS The carbon footprint factor in the carbon saving calculation is based on the OECD data (2008 Edition).
Repacking the Monitor, Appendix B Flexible Arm Installation This Chapter IncludesN > “Repacking the Monitor” on page 26 > “Flexible Arm Installation” on page 27 English−25...
Repacking the Monitor To repack the monitor for shipping, follow these instructions: NOTE:: Always remove the base stand when shipping the monitor. 1. Place the monitor face down on a non-abrasive surface. 2. Remove the cable cover (figure 1). 3. Using your thumb, press the button to unlock. 4.
Flexible Arm Installation This monitor is designed for use with a flexible arm. Contact NEC for more information. Follow the instructions provided by the manufacturer of the display mount. Remove the monitor stand before mounting. CAUTION:: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor.
Page 30
> “Energy Saving” on page 29 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. e are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.