Brightness/Contrast Controls; Size And Position Controls - NEC MultiSync E750 User Manual

Hide thumbs Also See for MultiSync E750:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Controls
OSM(On-Screen Manager) control buttons on the front of
the monitor function as follows:
Main Menu
Exits the OSM menu.
EXIT
Moves the highlighted area
CONTROL
up/down to select one of the
/
controls.
Moves highlighted area
CONTROL
left/right to select one of the
-/+
controls.
Has no function .
PROCEED
Resets all the controls within
RESET
the highlighted menu to the
factory setting.
NOTE:
When RESET is pressed in the main and sub-menu, a warning
window will appear allowing you to cancel the reset function.
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow ( ) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub, sub-menu, press PROCEED.

Brightness/Contrast Controls

BRIGHTNESS: Adjusts the overall image and background screen brightness.
CONTRAST: Adjusts the image brightness in relation to the background.
DEGAUSS: Eliminates the build-up of stray magnetic fields which alter
the correct scan of the electron beams and affect the purity of the screen
colours, focus, and convergence. When activated, your screen image will
jump and waver a bit as the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between uses
of the Degauss function.

Size and Position Controls

AUTO ADJUST: (MultiSync E950 only) Automatically adjusts the horizontal
and vertical size and position settings for applicable signal timings.
LEFT/RIGHT: Moves the image horizontally (left or right).
DOWN/UP: Moves the image vertically (up or down).
NARROW/WIDE: Decreases or increases the horizontal size of the image.
SHORT/TALL: Decreases or increases the vertical size of the image.
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or enters
sub, sub-menu.
Resets the highlighted control
to the factory setting.
E - 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync e950Jc-1747umwJc-1945umw

Table of Contents