Rexel cb256 User Manual page 7

Getting Started
Safety Tips
Please read and retain these instructions for
future reference.
➤ When punching, always ensure the
machine is on a flat, stable surface.
1. Unpacking and Setting Up
Your machine is ready to use when removed from the box. Retain
●
the packaging in case you need to return the machine for repair.
Position the machine on a flat stable surface.
●
Lift the handle to the vertical position.
●
.
2 Selecting the Correct Plastic Comb
Place the document against the size selector and note the
●
suggested comb element size.
Use the comb element size guide if you wish to confirm the size of the
comb element you are using.
Place one end of the comb element against the different profiles
●
in turn to find the appropriate profile.
The separate comb opening mechanism allows you to collate the
documents on the comb whilst punching more pages. Giving you a
quicker binding cycle.
➤ Always test the machine with scrap paper
before punching the final document.
➤ When punching PVC / PP covers, we
recommend the cover be punched with
some paper either side.
3.
●
●
●
4.
●
5.
●
●
1
➤ Do not punch metallic objects such as
staples or paper clips.
➤ Empty the waste tray regularly.
Inserting and Opening the Comb
Close the 'comb operating mechanism' by turning the 'comb
opening knob' clockwise.
Place the plastic comb open side up on the comb opening
mechanism. [Fig. 1]
Open the comb by turning the 'comb opening knob' anti-
clockwise.
Paper Edge Alignment
Rotate the green knurled wheel to move the edge guide to the
required setting of A4, 11" Letter or US Cover. [Fig. 2]
Punching the Document
Insert the sheets into the punching channel and align to the edge
guide. [Fig. 3]
Support the machine and lower the raised handle to punch.
[Fig. 4]
GB