Install The Extension Brackets - ECS K7AMA User Manual

Install the Extension Brackets

The extension brackets are used to connect features on the
mainboard to external connectors that can be attached to the system
chassis. Follow the steps below to install the extension brackets.
Note: All the ribbon cables used on the extension brackets
have a red stripe on the Pin-1 side of the cable.
LAN Adapter Extension Bracket (Optional)
This bracket supports an RJ45 network connector and connects to
the built in LAN header on the mainboard.
LAN Extension
Bracket
1. On the mainboard, locate the LAN header for t his bracket.
2. Plug the cable from the bracket into the LAN header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
1
LAN Header
14