Manual Installation; Utility Software Reference - ECS K7AMA User Manual

Manual Installation

Insert the CD in the CD-ROM drive and locate the PATH.DOC file
in the root directory. This file contains the information needed to
locate the drivers for your mainboard.
Look for the chipset and mainboard model; then browse to the
directory and path to begin installing the drivers. Most drivers have
a setup program (SETUP.EXE) that automatically detects your
operating system before installation. Other drivers have the setup
program located in the operating system subfolder.
If the driver you want to install does not have a setup program,
browse to the operating system subfolder and locate the readme
text file (README.TXT or README.DOC) for information on
installing the driver or software for your operating system.

Utility Software Reference

All the utility software available on the CD-ROM is Windows
compliant. It is provided only for the convenience of customers.
The following software is furnished under license and may only be
used or copied in accordance with the terms of the license.
Note: The software in these folders is subject to change at
anytime without prior notice. Please refer to the support CD
for available software.
AMI Flash Memory Utility
This utility enables you to erase the system BIOS stored on a Flash
Memory chip on the mainboard, and lets you copy an updated
version of the BIOS to the chip. Proceed with caution when using
this program. If you erase the current BIOS and fail to write a new
BIOS, or write a new BIOS that is incorrect, your system will
malfunction. Refer to Chapter 3, Using BIOS for more information.
36