Jumper Settings On Ie-78K0-Ns; Jumper Settings On Ie-78K0-Ns-A; Jumper Settings On Ie-78K0-Ns-A G-780009 Board; Jumper Settings On Ie-78K0-Ns-A G-78K0H Option Board - NEC uPD780318 Subseries User Manual

3.5 Jumper Settings on IE-78K0-NS

When using the IE-780338-NS-EM1 in combination with the IE-78K0-NS, set the jumper on the IE-78K0-NS as
shown below.
For details of these jumper positions, refer to the IE-78K0-NS User's Manual (U13731E).
Caution If the jumpers are set incorrectly, the board may be damaged.
JP2
Setting 2 to 3 shorted
Note The settings for the JP8 are as follows.
1-2 shorted: Internal selection of subsystem clock
3-4 shorted: External selection of subsystem clock

3.6 Jumper Settings on IE-78K0-NS-A

When using the IE-780338-NS-EM1 in combination with the IE-78K0-NS-A, set the jumper on the IE-78K0-NS-A
as shown below.
For details of these jumper positions, refer to the IE-78K0-NS-A User's Manual (U14889E).
Caution If the jumpers are set incorrectly, the board may be damaged.
Table 3-4. Jumper Settings on IE-78K0-NS-A G-780009 Board
JP2
Setting 2 to 3 shorted
Note The settings for the JP8 are as follows.
1-2 shorted: Internal selection of subsystem clock
3-4 shorted: External selection of subsystem clock
Table 3-5. Jumper Settings on IE-78K0-NS-A G-78K0H Option Board
CHAPTER 3 INSTALLATION
Table 3-3. Jumper Settings on IE-78K0-NS
JP3 JP4
1 to 2 shorted 1 to 2 shorted
JP3 JP4
1 to 2 shorted 1 to 2 shorted
Setting 2 to 3 shorted
User's Manual U16214EJ1V0UM
JP6 JP7
3 to 4 shorted 1 to 2 shorted
JP6 JP7
3 to 4 shorted 1 to 2 shorted
JP2
JP8
Note
JP8
Note
35