The above steps configure the following circuit and enable supply of the clock from the mounted oscillator to
the emulation device.
+5 V
Parts board
14
Crystal oscillator
Remarks 1. The sections enclosed in broken lines indicate the parts that are attached to the parts board.
2. There is JP8 on the IE-78K0-NS or IE-78K0-NS-A.
(3) When using an external clock
Short the 3 to 4 side on the jumper (JP8) of the IE-78K0-NS or IE-78K0-NS-A. There is no need to make any
settings via the integrated debugger (ID78K0-NS).
32
CHAPTER 3 INSTALLATION
8
Target
system
7
User's Manual U16214EJ1V0UM
IE-78K0-NS or IE-78K0-NS-A side
(Emulation device)
1 3 5
JP8
2 4 6