Fisher & Paykel OR90SDBGFX Installation Instructions And User Manual page 36

Care and cleaning
34
Cleaning the enamel cavity
Do not use oven cleaner, scourers or abrasive cleaners with acid or alkali content on catalytic
panels.
Catalytic panes are normally 'self-cleaning' because their special enamel breaks down greasy
splatters when the oven is used for non-greasy baking, especially at high temperatures. If you
o
seldom bake then, from time to time, heat an empty oven on Bake for 60-90 minutes at 250 C
to break down any greasy soiling.
If you wish to clean the remainder of the oven cavity, first remove the catalytic panels (see
'Fitting side racks and Catalytic panels' .
Clean the enamel on the inside of the oven when it has cooled down, using household
detergents or an ammonia-based cleaner. You may use 'off the shelf' oven cleaners, if you
carefully follow the manufacturers' instructions.