Fisher & Paykel OR90SDBGFX Installation Instructions And User Manual page 34

Care and cleaning
32
Replacing the triple-ring wok and dual burners
Carefully replace the burner parts as per the following Figs.
Fit the flame spreader to the housing as shown by the arrow in the Figs.36a-36b. Make sure the
burner is not able to rotate (Fig. 37).
Check that:
the ignitor is always clean to ensure trouble-free sparking.
The probe is always clean to ensure correct operation of the safety valves (some models only)
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and
methylated spirits (see Fig.29).
Probe
Fig. 36a Correct positioning of
flame spreader - triple-ring wok burner
Fig. 37 Correct positioning of
cap and ring - triple-ring wok and dual burner
Ignitor
Probe
A
Cap
B
Ring
Fig. 36b Correct positioning of
flame spreader - dual burner
Fig. 38 Incorrect and correct positioning
of cap and ring - triple-ring wok and dual burner
Ignitor