Using The Ice Cream Maker - Cuisinart ICE100BCU User Manual

Using the Ice Cream Maker

Before first use, clean the lid, mixing bowl and mixing paddles in warm soapy water.
N.B. Do not clean any of the parts with abrasive cleaners, hard implements or in the
dishwasher.
n Plug the unit into a suitable mains socket. The red LED light will illuminate and flash
to indicate the unit is in standby mode.
n Prepare the ingredients either using your own recipes or those provided on page 13.
N.B. If using your own recipes do not fill the mixing bowl more than 4cm from the
top (approx 1 litre max). As the mixture freezes it will increase in size.
n Insert mixing bowl into the base, ensure the bowl is correctly aligned.
n Depending on the type of frozen dessert you are making, insert either the ice cream
paddle or the gelato paddle into the mixing bowl. The ice cream paddle churns
ingredients perfectly for smooth, creamy results. The gelato paddle incorporates less
air into the ingredients and creates richly textured results with intense flavour. This
paddle is also ideal for sorbet. Ensure the mixing paddle is resting in the centre of the
mixing bowl.
n Pour the ingredients into the mixing bowl. Postion the clear lid by lining up the arrow
on the lid with the unlock icon on the base. Lock into place by turning anti clockwise.
The arrow on the lid should now be lined up with the lock icon on the base.
n Press the power button, the red LED light will stay illuminated and static. The LCD
screen will display '00'.
n Press the timer button to set the time from 60 to 10 minutes. The timer will default
to 60 minutes. Press and release the timer button to decrease the time in 1 minute
increments. Press and hold to scroll down more quickly.
N.B. If you add too much time keep pressing the timer until it will bring you back
to 10 minutes.
n Press the Start/Stop button, the freezing process will now begin.
n The LCD screen will count down to zero and the unit will beep 3 times to indicate when
the process has finished.
N.B. The red LED will illuminate and flash and the LCD display will flash '00' .
n Turn the unit off by pressing the power button.
N.B. There should be a 1cm gap between the bottom of the paddle and the bottom
of the stem.
9