Hitachi PB Series User Manual page 88

5–10 5.2 Creating a User Pattern
6. Press [ ] four times successively.
This moves the cursor to toward the upper and reverse.
7. Press [ ] four times successively.
The cursor moves toward the lower left-hand corner and reverses.
8. Press [Save].
The "Pattern save" screen opens.
9. Select the position where the pattern shall be saved.
Up to 40 destinations can be selected (for every character size).
To see another screen, press [Next char. set].
10. Press [OK].
The system registers the created pattern and returns to the "User pattern creation"
screen. The memorized pattern is displayed.
You can press [Cancel] to return to the "User pattern creation" screen without
saving the created pattern.
11. Press [Back].
You are returned to the "Auxiliary function menu" screen.
Section 5