Safety Precautions - Hitachi PB Series User Manual

Safety Precautions

Before using the printer, thoroughly read the following safety precautions to ensure optimal utilization
of the printer.
You should observe the precautions set forth below in order to use the product properly and avoid
endangering or causing damage to you or other persons. For the purpose of clarifying the severity of
injury or damage and likelihood of occurrence, the precautions are classified in two categories,
DANGER and CAUTION, which both describe the hazardous situations that may arise if you ignore
the precautions and perform an incorrect handling or operating procedure. The precautions in these
two categories are both important and must therefore be observed in any case.
If a warning of the CAUTION category is ignored, serious consequences may result depending on the
situation.
After you have read the manual, store it at a location where all printer operation personnel can refer
to it at all times.
All the instructions set forth in this manual are important and must therefore be observed without fail.
Pictograph Examples
Restrictions on Export
User hereby agrees not to export or re-export this product to any end-user who the user has reason to
suspect may utilize the product for the design, development or reproduction of nuclear, chemical or
biochemical weapons.
iv
DANGER is used to indicate the presence of a hazard which may cause
severe personal injury or death if the warning against performing an
DANGER
incorrect handling procedure is ignored.
CAUTION is used to indicate the presence of a hazard which may cause
personal injury or property damage if the warning against performing an
CAUTION
incorrect handling procedure is ignored.
This symbols are used to indicate precautions (including those related to
potential hazards and warnings) to be observed. Detailed information is
furnished by a picture within the symbol outline (a shock hazard is indicated by
the example shown left).
This symbols are used to describe prohibited actions. The details of a prohibited
action are given by a picture within or near the symbol outline (the example
shown left dictates that you must keep flames away from the printer).
This symbols are used to describe required actions. Detailed instructions are
given by a picture within the symbol outline (the example shown left dictates that
a ground connection must be made).