Operating Procedure - Hitachi PB Series User Manual

For general
instructions on the
modification of
settings, see
Section 2.1.3,
"Operations for
Modifying the Setting
Contents"
4–2 4.1 Operation Management
4.1.2

Operating procedure

4.1.2-1 Setting the operating time to 0 and print count to 0
1. Select [Maintenance] from the menu.
The "Maintenance menu" screen opens.
2. Press [Operation management].
The "Operation management" screen opens.
3. Press [Reset].
The operating time field then shows [0000] hours.
4. Touch the line to set Print count.
The cursor moves to the print count field.
Section 4