Hitachi PB Series User Manual page 27

Section 1.1.4,
"Shutdown (no-
cleaning stop)"
Section 2
If the ink jets out continuously, a fault exists.
Press the [Manual] key to display the manual control menu. Press the
[No cleaning stop] and [OK] keys in sequence to stop the ink ejection.
For the subsequent operations, see
beginning of an operation".
When the ink jets out, it may momentarily scatter and stain the paper. However,
this is no indication of a fault.
3. Wait until the status changes from "Starting" to "Ready".
If any startup fault occurs, see
beginning of an operation".
When the temperature is low (below approx. 20 °C), it takes slightly longer for
the printer to get "Ready for printing" than at normal temperatures.
4. Input the print target detection signal and verify the printing results.
Section 2.1.2, "If a fault occurs at the
Section 2.1.2, "If a fault occurs at the
When the print target detection signal
is input while the printer is "Ready",
the preselected print data will be
printed.
2.1 Startup 2–3