Changer (Optional); Controlling Cd Changer (Optional); Playing Mp3 Files With The Cd Changer (Optional); Multi-Changer Selection (Optional) - Alpine cda-9886 Quick Reference Manual

F/SETUP Select buttons
(1 through 6)
Controlling CD Changer (Optional)
An optional6-disc or l2-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400c (Multi-Changer Switching device) or the
KCA-4IOC (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 37 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press
SOURCE/<!>
to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
2
Press F/SETUP to activate Disc Select mode.
Disc Select Mode
Disc Select Mode •
-7 -7
(Disc No.1-·6) (Disc NO.7-12)
Disc Select Mode
RPT/M.I.X. Mode
-7
(Disc No.1-6)
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and
CD/MP3 playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit. For details. please see the CDIMP31
WMAlAAC section.
*
When a 12-disc CD changer is connected.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs. and CD-RWs containing MP3 files on this unit.
1
Press
SOURCE/<!>
to switch to the MP3 Changer
mode.
2
Press anyone of the disc select buttons
(1 through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press
.'11.
Pressing
./11
again will resume playback.
• The unit can play discs containing both audio data and MP3 data .
• For operating MP3 with an MP3 compatible CD Changer, refer to
"CDIMP3IWMAlAAC" pages JO to 13.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will suppon up to 6 CD Changers. When
operating two or more changers. the KCA-4OOC (Multi-Changer
Switching device) must be used. If you use I Switching device. you can
connect up to 4 CD Changers. If you use 2 Switching devices. you can
connect up to 6 CD Changers. When using KCA-4IOC (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press
SOURCE/<!>
on this unit to activate the CD
Changer mode.
Alternatively. press SOURCE on the remote control
(RUE-4202) to activate the CD Changer mode.
SOURCE ----j,...----,
---'1::;:.e--'--1f-- BAND
2
Press BAND on this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3
Press BAND until the desired CD Changer indicator
appears on the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears on the display.
• If the selected CD Changer is not connected. the display
will
show
"NO CHANGER (No.)".
• To operate the selected changer, see "CDIMP3IWMAlAAC"
(pages JO to 13).
• For funher details about the external input (AUX) when using
KCA-4JOC. see "Setting the AUX Mode (V-Link)" on page 20.
37-EN
F/SETUP Select buttons
(1 through 6)
Controlling CD Changer (Optional)
An optional6-disc or l2-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400c (Multi-Changer Switching device) or the
KCA-4IOC (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 37 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press
SOURCE/<!>
to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
2
Press F/SETUP to activate Disc Select mode.
Disc Select Mode
Disc Select Mode •
-7 -7
(Disc No.1-·6) (Disc NO.7-12)
Disc Select Mode
RPT/M.I.X. Mode
-7
(Disc No.1-6)
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and
CD/MP3 playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit. For details. please see the CDIMP31
WMAlAAC section.
*
When a 12-disc CD changer is connected.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs. and CD-RWs containing MP3 files on this unit.
1
Press
SOURCE/<!>
to switch to the MP3 Changer
mode.
2
Press anyone of the disc select buttons
(1 through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press
.'11.
Pressing
./11
again will resume playback.
• The unit can play discs containing both audio data and MP3 data .
• For operating MP3 with an MP3 compatible CD Changer, refer to
"CDIMP3IWMAlAAC" pages JO to 13.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will suppon up to 6 CD Changers. When
operating two or more changers. the KCA-4OOC (Multi-Changer
Switching device) must be used. If you use I Switching device. you can
connect up to 4 CD Changers. If you use 2 Switching devices. you can
connect up to 6 CD Changers. When using KCA-4IOC (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press
SOURCE/<!>
on this unit to activate the CD
Changer mode.
Alternatively. press SOURCE on the remote control
(RUE-4202) to activate the CD Changer mode.
SOURCE ----j,...----,
---'1::;:.e--'--1f-- BAND
2
Press BAND on this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3
Press BAND until the desired CD Changer indicator
appears on the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears on the display.
• If the selected CD Changer is not connected. the display
will
show
"NO CHANGER (No.)".
• To operate the selected changer, see "CDIMP3IWMAlAAC"
(pages JO to 13).
• For funher details about the external input (AUX) when using
KCA-4JOC. see "Setting the AUX Mode (V-Link)" on page 20.
37-EN