Ipod@ (Optional); Playback; Searching For A Desired Song - Alpine cda-9886 Quick Reference Manual

iPod@ (Optional)
An iPod@ can be connected to this unit by using the proprietary
ALPINE FULL SPEEDTM Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
Fast forward through the current song:
Press and hold
~.
Advance to the beginning of the next song:
Press
~.
An iPod can contain hundreds of songs. By using file tag infonnation
and keeping these songs organized in playlists, this unit's search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlistl
ArtistlAlbumlSong/PodcastlGenrelComposerlAudiobook search mode
to narrow searches based on the table below.
Searching for a desired Song
3
To pause playback, press
~/II.
Pressing
~
III
again will resume playback.
A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
" If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing .... or
~.
" An episode may have several chapters. The chapter can be changed
by pressing'" or
~.
6
~ lENT
':::>
4 5
GQ
~
IESC Preset buttons
(1 through 6)
~/II
Rotary encoder
~
VIEW
...
~
SOURCElc!>
" Set AUX+ Setup to OFF when an iPod is connected (refer to "Setting
the AUX+ Setup Mode" on page 20).
" If
the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF.
iPods usable with this unit
" The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
" If the unit is used with iPod software versions of iTunes earlier than
7. 1.0.59, correct function and peiformance are not guaranteed.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlisl Song
-
-
Artist" Album" Song
-
Album' Song
-
-
Song
- - -
Podcast Episode -
-
Genre·
Artist* Album" Song
Composer' Album' Song
-
Audlobook
- - -
For example: Searching by Artist name
The following example explains how an ARTIST search is perfonned.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
~
lENT to activate the search selection
mode.
2
Turn the Rotary encoder to select the Artist search
mode, and then press
~
lENT.
3
4
Playback
1
Press SOURCElc!> to switch to the iPod mode.
TUNER
~
XM/SIRIUS,I
~
DISC
~
USB
~
iPod,2/AUX+,3
~
Bluetooth Audio,4
~
CHANGER,5
~
TUNER
,J
Only when XM Radio or SIRIUS Radio is connected.
02 Displayed only when the iPod is connected and AUX
+
Setup is set to
OFF, refer to "Setting the AUX+ Setup Mode" (page 20).
03 Displayed only when the AUX + Setup is set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
04 Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
,5
Only when the CD changer is connected.
2
Press'" or
~
to select the desired song.
Return to the beginning of the current song:
Press . . . .
Fast backward through the current song:
Press and hold . . . .
Playlist
H
Artist
H
Album
H
Song
H
Podcast
H
Genre
H
Composer
H
Audiobook
H
Playlist
Turn the
Rotary encoder to select the desired
Artist, and then press
~
lENT.
Turn the
Rotary encoder to select an album, and
then press
~
lENT.
5
Turn the
Rotary encoder to select a song and
press
~
lENT.
The selected song is played back.
" After pressing and holding ~ lENT for at least 2 seconds while in
each hierarchy (except Song and Audiobook hierarchy), ali songs of
the selected hiemrchy are played back.
" After selecting [AUl in the search mode with "''', press and hold
~
lENT for at least 2 seconds to play back ali songs in the iPod or
selected search mode.
While in the search mode, if you press and hold
~IESCforat
least
2 seconds, or no operation is peiformed for 10 seconds, the search
mode is canceled.
" In the search mode, pressing
~/ESC
will return to the previous
mode.
" When search is made during M.J.X. play, the M.J.X. play mode will be
canceled.
27-EN
iPod@ (Optional)
An iPod@ can be connected to this unit by using the proprietary
ALPINE FULL SPEEDTM Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
Fast forward through the current song:
Press and hold
~.
Advance to the beginning of the next song:
Press
~.
An iPod can contain hundreds of songs. By using file tag infonnation
and keeping these songs organized in playlists, this unit's search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlistl
ArtistlAlbumlSong/PodcastlGenrelComposerlAudiobook search mode
to narrow searches based on the table below.
Searching for a desired Song
3
To pause playback, press
~/II.
Pressing
~
III
again will resume playback.
A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
" If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing .... or
~.
" An episode may have several chapters. The chapter can be changed
by pressing'" or
~.
6
~ lENT
':::>
4 5
GQ
~
IESC Preset buttons
(1 through 6)
~/II
Rotary encoder
~
VIEW
...
~
SOURCElc!>
" Set AUX+ Setup to OFF when an iPod is connected (refer to "Setting
the AUX+ Setup Mode" on page 20).
" If
the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF.
iPods usable with this unit
" The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
" If the unit is used with iPod software versions of iTunes earlier than
7. 1.0.59, correct function and peiformance are not guaranteed.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlisl Song
-
-
Artist" Album" Song
-
Album' Song
-
-
Song
- - -
Podcast Episode -
-
Genre·
Artist* Album" Song
Composer' Album' Song
-
Audlobook
- - -
For example: Searching by Artist name
The following example explains how an ARTIST search is perfonned.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
~
lENT to activate the search selection
mode.
2
Turn the Rotary encoder to select the Artist search
mode, and then press
~
lENT.
3
4
Playback
1
Press SOURCElc!> to switch to the iPod mode.
TUNER
~
XM/SIRIUS,I
~
DISC
~
USB
~
iPod,2/AUX+,3
~
Bluetooth Audio,4
~
CHANGER,5
~
TUNER
,J
Only when XM Radio or SIRIUS Radio is connected.
02 Displayed only when the iPod is connected and AUX
+
Setup is set to
OFF, refer to "Setting the AUX+ Setup Mode" (page 20).
03 Displayed only when the AUX + Setup is set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
04 Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
,5
Only when the CD changer is connected.
2
Press'" or
~
to select the desired song.
Return to the beginning of the current song:
Press . . . .
Fast backward through the current song:
Press and hold . . . .
Playlist
H
Artist
H
Album
H
Song
H
Podcast
H
Genre
H
Composer
H
Audiobook
H
Playlist
Turn the
Rotary encoder to select the desired
Artist, and then press
~
lENT.
Turn the
Rotary encoder to select an album, and
then press
~
lENT.
5
Turn the
Rotary encoder to select a song and
press
~
lENT.
The selected song is played back.
" After pressing and holding ~ lENT for at least 2 seconds while in
each hierarchy (except Song and Audiobook hierarchy), ali songs of
the selected hiemrchy are played back.
" After selecting [AUl in the search mode with "''', press and hold
~
lENT for at least 2 seconds to play back ali songs in the iPod or
selected search mode.
While in the search mode, if you press and hold
~IESCforat
least
2 seconds, or no operation is peiformed for 10 seconds, the search
mode is canceled.
" In the search mode, pressing
~/ESC
will return to the previous
mode.
" When search is made during M.J.X. play, the M.J.X. play mode will be
canceled.
27-EN