Table of Contents
Advertisement
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Press
4.
The song is played back repeatedly.
RPT
(off)
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
• During repeat playback, no other songs are selectable by pressing
or
.
Displaying the Text
You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
• If you want to change the display when the Text Scroll is set to
Manual, press TITLE while the text is scrolling. If the scroll has been
completed, press TITLE to scroll the text again.
1
Song Name *
2
Track No./All Songs No. /Elapsed Time
*
3
*
1
Album Name *
1
Song Name *
(Blank)
(Blank)
1
*
TAG information
If the Scroll Setting (page 23) is set to "Auto", the tag information
will scroll automatically.
If there is no text information, nothing will be displayed.
2
*
The numbers of all songs displayed vary depending on the songs
selected by the search.
3
*
When the Scroll Setting (page 23) is set to "Auto," the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128
(128 byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with this unit.
26
-EN
RPT
3
*
1
Artist Name *
1
Song Name *
*
1
Song Name *
Calendar/Clock
1
Song Name *
2
Track No./All Songs No. /Elapsed Time
*
Changer (Optional)
/
/ENT
SOURCE/
BAND
FUNC./SETUP
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 27 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press SOURCE/
to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
2
Press FUNC./SETUP to activate Disc Selection
mode.
Disc Select Mode
(Disc No.1~6)
RPT/M.I.X. Mode
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and
CD/MP3 playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA/AAC section.
* When a 12-disc CD changer is connected.
Select buttons
(1 through 6)
Disc Select Mode *
(Disc No.7~12)
Disc Select Mode
(Disc No.1~6)
Advertisement
Table of Contents
