Eizo DuraVision FDX1003 Setup Manual page 34

*1 DC power terminal block
Connector Pin Assignment
1 2 3
*2 Button extension connector: S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
●
How to assemble
Attention
• Since the panel mounted on the monitor is tightened with a metal panel fitting screw, please make
the selection considering the following points.
- Flat
- A thickness of 5 mm
- A structure having the strength to support fixing with the screw.
1. Insert the monitor into the mount opening of the panel from the front.
The dimensions of a fitting opening are the "Panel opening dimensions" shown in the exterior
view.
34
Pin No. Signal
1 DC12V
2 NC
3 Ground
Pin No. Signal
1 KEY0
2 KEY1
3 Ground
Mount opening (Panel opening dimensions):
257±0.5mm × 219±0.5mm(FDX1003/FDX1003T)
302±0.5mm × 241±0.5mm(FDX1203/FDX1203T)
Power sequencing
DC12V
10V
t1
t1 < 50ms
10V
5V
30ms < t2
t2