Accessories For (Electronic) Engine Governor / Control System - MTU 12V2000M91 Operating Instructions Manual

8.24 Accessories for (Electronic) Engine Governor / Control System

8.24.1 Engine governor and connectors – Cleaning
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Connector pliers
Isopropyl alcohol
Engine governor and connectors
– Cleaning
1. Remove coarse dirt from housing surface
with isopropyl alcohol.
2. Remove dirt from surface of connectors (1),
connector sockets and shrink sleeves (2) us-
ing a cloth moistened with isopropyl alcohol.
3. Check legibility of cable labels. Clean or re-
place illegible labels.
Cleaning severely contaminated
connectors on engine governor
1. Use connector pliers (2) to disengage bayo-
net union nut (4) and withdraw connector (3).
2. Clean connector housings, connector socket
housings (1) and all contacts with isopropyl
alcohol.
3. When connectors, sockets and all contacts
are dry: Fit connectors and check governor
connections (→ Page 147).
144 | Task Description | MW15409/04E 2015-08
Part No. Qty.
F30017884 1
X00058037 1