Load Optimal Settings; Load Best Performance Settings - PC Chips M726MRT User Manual

Offboard PCI IDE
If you are using an IDE interface add-in card,
Card
use this item to define which PCI slot the card is
installed in. Leave this item at Auto for
automatic detection.
Pri. / Sec. Offboard
If you are using an IDE interface add-in card,
PCI IDE IRQ
use these items to assign an IRQ to the primary
and secondary IDE channels.
PCI Slot 1/2/3 IRQ
You may install expansion cards in the PCI
Priority
slots that require the use of an Interrupt
Request Line. Use these three items to
determine which slot has priority when the plug
and play OS/BIOS is dynamically allocating
IRQs to competing demands from the
expansion cards.
DMA Channel X
If you set this to PnP, the system will
dynamically allocate DMA channels as they are
required. If you set a DMA channel to ISA/EISA,
it will be reserved for a non-plug and play ISA
or EISA device.
IRQ X
If you set this to PCI/PnP, the system will
dynamically allocate IRQs as they are required.
If you set an IRQ to ISA/EISA, it will be
reserved for a non-plug and play ISA or EISA
device.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
optimal default values. The optimal default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
best-performance default values. The optimal default values are