Load Optimal Settings; Load Best Performance Settings - PC Chips M598LMR User Manual

PCI VGA Palette When this item is enabled, multiple VGA
Snoop devices operating on different buses can handle
data from the CPU on each set of palette
registers on every video device.
Assign IRQ for If this item is enabled, an IRQ will be assigned
to the PCI VGA graphics system. We
VGA
recommend that you set this value to No.
DMA Reserved for If you set it to a DMA, the channel will be
reserved for an installed non-PnP ISA or EISA
ISA
expansion card.
IRQ Reserved for If you set it to an IRQ, the IRQ line will be
reserved for an installed non-PnP ISA or EISA
ISA
expansion card.
Reserved Memory
This item lets you reserve a block of memory
for any device that requires it.
Size
Reserved Memory This item lets you set the address for any block
Address of memory that has been reserved.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
optimal default values. The optimal default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
best-performance default values. The optimal default values are
quite demanding and your system might not function properly if
you are using slower memory chips or other kinds of low-
performance components.