After Fueling; Boarding; Boat Planing - CORRECT CRAFT 100077 Owner's Manual

Nautiques 2010 v-drive boat owner's manual
Table of Contents

Advertisement

After fueling:

1. Tighten the fuel filler cap. Wipe up any spilled fuel.
2. Check all fuel lines, hoses and connections for leaks and
deterioration.
Each time you refuel, inspect all fuel lines, hoses and connections
for leaks and deterioration.

Boarding

When boarding the boat, always step in. DO NOT jump. Avoid
stepping on fiberglass or other potentially slippery surfaces. Board
one person at a time.
DO NOT board the boat while carrying gear. Set the gear on the
dock, board the boat and then pick up the gear.
Use the boarding platform to board from the water. To prevent
injury, make sure the engine is OFF when swimmers, divers and
skiers are boarding or even near the platform.

Boat Planing

The performance of your Nautique boat depends on load weight
and distribution. DISTRIBUTE WEIGHT EVENLY, from bow to
stern, and also from port to starboard.
If your boat is equipped with a ballast tank or loaded, loss of
horizon may occur when you begin to plane your boat. Get on
plane immediately to restore the vision of your path. DO NOT
operate your boat if the loss of horizon prevents you from operating
it safely.
!
equipment and supplies could result in an accident,
especially in rough waters.
Getting Underway
NOTICE
Overloading of passengers, personal
6-5

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

216Open bow 200V-drive200 open bow200 closed bow

Table of Contents