First Wash - Russell Hobbs RH1042 Instruction Manual

First Wash

Before using the appliance for laundry, ensure you run the machine on
a program of 90°C (Cotton program), with detergent and without
laundry.
Before Use
• Ensure the inlet hose is connected correctly and turn the inlet valve
from its closed position to the open position.
• Check that the outlet hose is connected correctly.
• Plug in the machine to the power socket.
• Run the machine on a cycle of 90°C (Cotton program), with detergent and
without laundry.
• After cycle has completed, the appliance is ready for use.
Important note:
If the supply power is turned off at any stage of the washing program and
then turned on, your machine will continue the program from the point
where it was interrupted. This is not harmful for your machine.
Recommendations
• Put detergent into the drawer at the beginning of each wash.
• It is recommended that you wash only extremely dirty laundry
in prewashing programme.
• The amount of laundry you put in your washing machine should not
exceed 5kg.
• If your machine is not going to be used for a long period of time you
should unplug the appliance, turn off the water inlet and leave the door
slightly open. This is so that the inside of your machine will remain dry
and will not cause an unpleasant odour.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
www.productcareuk.com
or visit us at
22