Choice Of Detergent And Placing Into The Machine - Russell Hobbs RH1042 Instruction Manual

Hide thumbs Also See for RH1042:
Table of Contents

Advertisement

How to Use

Choice of detergent and placing into the machine

The amount of detergent you will put in your machine will depend on the
following criteria:
The amount of detergent needed is based on how dirty the laundry is.
Do not prewash your less stained laundries and put the correct amount of
detergent compartment of the detergent drawer.
The Pre-wash feature might be used for your very dirty laundry. If you are
going to do a pre-wash, place 1/4 of the detergent you would normally put in
the detergent compartment into the pre-wash compartment numbered 1,
and put the remaining 3/4 to the detergent compartment numbered 2.
Use detergents produced for automatic washing machines in your
machine. Adhere to the advice of detergent manufacturers while
determining the amount of detergent you should use with your laundry.
The higher the degree of hardness of the water the more detergent you will
need to use.
Put the softener in the softener compartment in the detergent drawer. Do
not exceed the 200 mark level. Otherwise, softener will flow into washing
water through flushing.
Softeners with high density are required to be thinned out to a degree before
being put in the drawer. High density softener will clog the flush and block
the flow of the softener.
• When using liquid detergent, use the liquid detergent apparatus supplied with the
appliance.
• You can use liquid detergent for all programs without pre-wash.
• For this, inserted the liquid detergent apparatus into the groves located in the
main detergent compartment.
• Add the correct amount of liquid detergent as directed by the detergent
manufacturers.
• Do not exceed the 200mm level mark as indicated on the apparatus.
• Remove the liquid detergent apparatus if reverting back to powder detergent, see
page 17.
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
For Customer Services & Spare Parts please call 0345 208 8750
or visit us at
www.productcareuk.com
18

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents