Safety Instructions For Maintenance; Troubleshooting - Bartscher Regina 40 Manual

Remove the submersion tube through the center of the filter basket and place in the water
o
reservoir. Pay attention to ensure that the submersion tube is placed precisely in the heating
grate.
Pour the solution into the coffee maker's water reservoir. Replace the lid and turn the device on.
o
Start the brewing process and leave the device on for approx. 15 minutes.
o
Next, turn the device off and drain the descaling solution through the spout.
o
After the descaling process repeat the brewing process at least three times to remove any
o
remaining chemicals.
Thoroughly rinse the water reservoir, submersion tube and filter with warm water, and drain it
o
through the spout.
The coffee maker is ready for further use.
o
WARNING!
Do not leave the device unattended during the descaling process!
Use goggles and protective gloves when descaling!
Wash hands thoroughly after descaling.
o

6.3 Safety instructions for maintenance

Check the mains lead from time to time to ensure it isn't damaged in any way. Never use the
o
device if the lead is damaged. If the lead is damaged it must be replaced by a qualified
electrician.
In case of damage or malfunction, please contact your stockist or our customer service centre.
o
Only a qualified technician and using original spare parts and accessories should carry out
o
repairs and maintenance of the device. Do not attempt to repair the device yourself.

7. Troubleshooting

CAUTION!
The device is provided with an overheating protection.
When the overheating protection has been activated, let the
device cool down. Press the RESET button underneath the
device several times.
The coffee maker is now ready for use again.
NOTE!
From experience, it can be said that the overheating protection is triggered when the
heating bore is calcified. An immediate decalcification is mandatory.
The overheating protection may also be activated during/by transport. Please follow the
instructions above!
In the following you may find causes for overheating protection activation and hints for
troubleshooting.
- 26 -