Bartscher Regina 40 Manual page 11

Wash all parts in warm water, dry them and re-assemble. Make sure the tap lid is screwed tightly
o
in order to ensure a properly sealed closure.
Cleaning the heating grate
The coffee maker's heating grate must be cleaned weekly, especially when the device is used
o
daily.
A lime scraper is provided in the packing in order to clean the heating bore at the bottom of the
o
device.
NOTE!
Use the provided lime scraper!
Soap-drenched cleansing
cloth made of steel wool or a
thin cleaning rag
Lay a soap-drenched cleansing cloth made of steel wool or a thin cleaning rag over the heating
o
bore.
Insert the narrow side of the lime scraper into the heating bore.
o
By twisting it to both sides you will clean the heating bore.
o
The heating bore is cleansed as soon as you see the metal shining.
o
The use of additional cleaning agents might be necessary.
o
In order to remove all soap and cleaning agent residues, rinse the water tank thoroughly after
o
cleaning.
NOTE!
When the coffee maker is not in use, remove the standpipe so it does not get stuck in the
heating bore.
Descaling
ATTENTION!
To lengthen the device's life and ensure quality coffee, descale regularly!
Returns will not be accepted if the device is not descaled regularly – in accordance with the
instructions below. Such returns are not covered by the warranty!
When used daily the device must be thoroughly cleaned every two weeks to remove oils, coffee
o
grounds and hard deposits, along with removal of stones.
For descaling we recommend the tested „Bartscher Formula for quick descaling (Art. no.:
o
190.063).
For cleaning, use commercially available coffee maker cleaning agents.
o
Mix the contents of the bag (15 g) in approx. 4 litres of water.
o
Lime scraper
Heating bore
-
- 25