Table of Contents
Advertisement
Chapter 1
Introduction
VXI-1394 Interface Kit Overview
Note
You can connect multiple 1394 devices together in a tree topology. However,
increasing the complexity of the 1394 bus topology can lower overall system performance.
You cannot connect multiple 1394 devices in a circular bus topology (one which
Caution
provides more than one data path between any two nodes). Doing so will render your
VXI-1394 inoperable and may crash your system.
Hardware Description
D-size VXI mainframes have connections for a P3 connector. The VXI-1394,
Note
however, does not have this connector and, if configured as a Slot 0 controller, cannot
provide the necessary control for VXI devices that need P3 support.
VXI-1394 User Manual for Windows
❑
National Instruments software CD
❑
This manual
The interface kit described in this manual links a 1394-equipped computer
directly to the VXIbus using the IEEE 1394 bus. The VXI-1394 kit uses
this high-speed (up to 400 Mbits/s) serial bus to link your computer
running Windows to a VXI chassis.
The VXI-1394 kit includes the NI-VXI/NI-VISA software for Windows,
a C-size VXI-1394 module, a 1394 cable, and an industry-standard OHCI
host adapter.
A 1394-equipped computer connected to a VXI-1394 interface can
function as a VXI Commander and Resource Manager. The VXI-1394
interface kit gives your computer the capability to perform as if it is
plugged directly into the VXI backplane as an embedded CPU module.
The VXI-1394 transparently translates between the IEEE 1394 and
VXI protocols.
The software included with the kit is for Pentium-based computers.
The VXI-1394 module is a VXIbus device with optional VXIbus Slot 0
capability so that it can reside in any slot in a C-size or D-size chassis.
If you enable this capability, the VXI-1394 can automatically determine
whether it is located in VXI Slot 0.
1-2
ni.com
Advertisement
Table of Contents
