Hardware Settings - National Instruments VXI-1394 User Manual

Default Settings
There are no hardware settings on the PCI-1394 board.
Note

Hardware Settings

© National Instruments Corporation
This appendix summarizes the default settings for the hardware and
software in the VXI-1394 kit. If you need more information about a
particular setting, or if you want to try a different configuration, refer
to Appendix C, Advanced Hardware Configuration
hardware reference and to the MAX online help for your software
reference.
Table B-1. VXI-1394 Hardware Default Settings
Hardware Component
W1—VXIbus Slot 0/Non-Slot 0
S6—VXIbus CLK10 source
S5—External trigger termination
S3—SMB CLK10 direction
S2—SMB CLK10 termination
S4—Polarity of external SMB
CLK10
S7—Configuration EEPROM
Automatic detection
From onboard oscillator
OFF: unterminated
IN: receive CLK10 signal
OFF: ignored
Inverted
Do not load from factory setting
B-1
B
Settings, for your
Default Setting
VXI-1394 User Manual for Windows