Unpacking The Kit; Verifying The Kit Contents - National Instruments R Series Getting Started Manual

Unpacking the Kit

Caution To prevent electrostatic discharge from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution Never touch the exposed pins of connectors.
Notify NI if the device appears damaged in any way. Do not install a damaged device.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify the following components are in your kit.
1. NI USB-7856R Module
2. USB Cable
3. Ferrite Bead
2 | NI USB-7856R Getting Started Guide | ni.com
Figure 1. Kit Contents for the NI USB-7856R
1
4
2
5
4. NI-RIO Media
5. Power Supply
6. Getting Started Guide
3
6