Ieee 1394; Vga - National Instruments NI Vision CVS-1456 User Manual

Chapter 2 LEDs, DIP Switches, and Connectors

IEEE 1394

You can use a 4-pin to 6-pin converter cable with cameras that have their own
Note
external power supply and do not require power from the IEEE 1394 bus.

VGA

NI CVS-1450 Series User Manual
1 Grounding Lug
Figure 2-5. Grounding Lug on the NI CVS-1450 Device
The IEEE 1394 connectors on the NI CVS-1450 device provide a reliable,
high-frequency connection between the NI CVS-1450 device and up to
three DCAM-compliant IEEE 1394 cameras. For information about
the amount of bandwidth available for connecting cameras, refer to the
Available Camera Bandwidth
Overview.
To access the IEEE 1394 connectors on the NI CVS-1450 device, use any
standard 6-pin IEEE 1394 cable.
The VGA connector on the NI CVS-1450 device provides connection
between the NI CVS-1450 device and a VGA monitor. Use any standard
15-pin VGA cable to access the VGA connector. Figure 2-6 shows the
location and pinout of the VGA connector.
POWER
C
iso
V
iso
(5-30VDC)
C
V
(24VDC ±10%)
2 Power Connector
section of Chapter 1,
2-8
1
2
NI CVS-1450 Series
ni.com